X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: cattleman on October 02, 2006, 03:31:36 PM
-
I recently purchased an X10 Powerhouse Security System and installed it without any problems. After the first day, the chimes that sound on the console every time a door is opened became very annoying. Since the unit has no way of silencing these chimes, I took it upon myself to do so. I went to Radio Shack and bought a DPDT switch which I installed into the side of the console. I then routed the chimes' wiring through the switch so I can now turn them off during the day when we are in and out the doors (about 500 times a day) and rearm them at night. While it might invalidate the warranty, it is well worth it to stop those annoying chimes whenever I don't want to hear them.
Does anyone else find them annoying?
{Duplicate post deleted - CS]
-
What was wrong with the Run1 switch position? If I want chimes I just go to Run2.........
-
What was wrong with the Run1 switch position? If I want chimes I just go to Run2.........
Yeah all you had to do is move the switch to run 1 run 2 is suppose to function like that so that you know when a door/window has been open. Next time before you do a major modification check here first the manuals are often confusing and omit a lot of stuff although I'm certain that information is there.
Tcj