🖥️ActiveHome Pro => Plug-ins => OnAlert => Topic started by: Grumpy Mark on October 15, 2006, 02:55:14 PM
Title: Trigger alarm using macro
Post by: Grumpy Mark on October 15, 2006, 02:55:14 PM
Is it possilbe to trigger an alarm condition using a macro or none security device ie: x10 dual motion floodlamp?
Title: Re: Trigger alarm using macro
Post by: Tuicemen on October 15, 2006, 03:47:25 PM
True it many are finding it is impossible to trigger a macro directly with a security module BUT:
You can indirectly trigger it!
How ? By using Phantom/dummy/virtual modules! ;) :D ;D
Title: Re: Trigger alarm using macro
Post by: Grumpy Mark on October 19, 2006, 10:13:27 PM
Actually I dont want to trigger a macro using a security device, I want to trigger an alarm using a macro or x10 device. For example if my floodlamp motion detector sees movement and turns on, I want to use that event to also trigger an alarm condition so my x10 securty system dials my cell phone.
Title: Re: Trigger alarm using macro
Post by: Tuicemen on October 19, 2006, 10:49:39 PM
Hum I don't know if you can do that I don't have a Ds7000! But you can use AlertDialer to do that! It will send a voice message then wait for a responce from you ! ;)
Title: Re: Trigger alarm using macro
Post by: Grumpy Mark on October 20, 2006, 01:14:26 AM
Thanks, that may work for me. I will check it out.
Title: Re: Trigger alarm using macro
Post by: Tuicemen on October 22, 2006, 05:06:45 PM
Thanks, that may work for me. I will check it out.
If you find any problems or would like to suggest an add to AlertDialer (http://www.angelfire.com/in2/ontkoi/X10AHP/) feel free to e-mail me or post here: Topic: Phone Control (AlertDialer) Addon (Read 2964 times) (http://www.x10community.com/forums/index.php?topic=4776.0)