X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: donutlou on November 08, 2006, 06:19:06 PM

Title: using the palm pad remote to set off a series of macros
Post by: donutlou on November 08, 2006, 06:19:06 PM

how do i set it up so i can use my palm pad remote to set off a macro to set  the mood in my living room. ie dim the lights on different housecodes to the same level?

Title: Re: using the palm pad remote to set off a series of macros
Post by: KDR on November 08, 2006, 06:44:29 PM

Lets say your palm pad is set to house code "C". Create a macro and put all you modules and commands in it and then assign the macro as C1.  When you press C1 On on the palm pad the macro will run.

You can do a search on the board to find out about setting up the macro and using delays, flags and things  like that. Any other questions feel free to post them.

Title: Re: using the palm pad remote to set off a series of macros
Post by: donutlou on November 08, 2006, 06:50:19 PM

thanks, ive been asking a few questions, and been getting good answers. thanks again