X10 Community Forum
🔌General Home Automation => Original ActiveHome => Topic started by: FELDMD on April 10, 2007, 01:40:37 PM
-
I have been using ActiveHome 1.42 with Windows XP Pro and CM11A to turn my lights on/off for a few years now. Recently, the lights would not turn on, but would turn off as scheduled. I can control the lights with not problem from my computer. I have replaced the wall module and uninstalled/reinstalled the software. The problem still persists.
Any help would be appreciated.
-
...Recently, the lights would not turn on, but would turn off as scheduled. I can control the lights with no problem from my computer...
Start here: MAP / MEASURE / CORRECT (http://www.x10community.com/forums/index.php?topic=9899.msg62635#msg62635)
The odd part of your problem is you state that manual operation from the computer, through the CM11A, works. Create a new profile with minimal modules and 1 or 2 timers for testing (i.e. LAMP ON, 2 minutes later LAMP OFF, 2 minutes later LAMP ON...) and see what happens. ON without OFF I would first blame a noisy load.
...I have replaced the wall module and uninstalled/reinstalled the software. The problem still persists.
Part Number?
-
Using wall switch module WS467; replaced with new one shortly before reinstalling software.