X10 Community Forum
🔌General Home Automation => Automating Your House => Topic started by: jacobichka on April 28, 2007, 02:09:27 PM
-
I have an idea to rewire my front door light. Currently the light turns on and off according to a wall timer. I'm looking to buy a timer with two zones or switches.
For example:
- 1.) First Zone at 7 p.m. will activate dusk/dawn sensor,and if it is dark enough the light will come on.
- 2.) At 12 a.m. First Zone turns off and Second Zone turns on to activate a motion sensor until 4 a.m.
I searched the web for such a timer, but couldn't find one. Any Ideas, will be very appreciated.
Thanks
Jacob
[TTA Edit: Formatted so that responses could be clearly directed to numbered points.]
-
...I searched the web for such a timer, but couldn't find one. Any Ideas, will be very appreciated.
- PR511 PhotoFlood: 1 (to detect Dusk/Dawn & Motion)
- WS467 Wall Switch: 1 or more (to control lights, independent of PR511 Internal Relay, but according to AH/AHP logic)
- CM11A/AH (@ $10) or CM15A/AHP (@ $50): 1 (to contain logic)
...For example:
- 1.) First Zone at 7 p.m. will activate dusk/dawn sensor,and if it is dark enough the light will come on.
- 2.) At 12 a.m. First Zone turns off and Second Zone turns on to activate a motion sensor until 4 a.m.
[/size]
ADVANCED SEARCH the Archives for previous posts with KEYWORD: 'PR511', USERID: 'TakeTheActive'.
I've been using this setup for years and have previously described it here... ;)