X10 Community Forum

💬General Category => General Discussion => Topic started by: redruff on August 11, 2007, 04:50:23 PM

Title: x10 eagle eye repeater
Post by: redruff on August 11, 2007, 04:50:23 PM
Does anyone make an x10 eagle Eye motion sensor repeater that is weatherproof?

I'm using the Eagle Eye's for a project. I'd like a sensor several hundred feet away but they don't seem to have the power to reliably send a signal that far.
Thanks

Title: Re: x10 eagle eye repeater
Post by: HA Dave on August 11, 2007, 06:02:48 PM

I'd like a sensor several hundred feet away


You can NOT accomplish that with a normal-regular X10 device. What are you trying to do from several hundred feet away?
Title: Re: x10 eagle eye repeater
Post by: HA Dave on August 13, 2007, 08:57:40 PM
Ok.... so I am not the type of guy that can just say "No, you can't do that".

There is a product called: The Reporter Wireless Driveway Alert System (http://www.smarthome.com/7317.html)

Features of the Reporter Wireless Driveway Alert System include:  Amazing range; the sensor has a 30' range and can transmit a signal to the receiver up to 1,200' away. Receiver features sound control and has an output to trigger external alarms or bells.

You could use the output to active the Powerflash module (http://www.automatedoutlet.com/product.php?productid=138&cat=0&page=1) and intergrate the reporter into an X10 system.
Title: Re: x10 eagle eye repeater
Post by: Walt2 on August 13, 2007, 09:24:15 PM
Does anyone make an x10 eagle Eye motion sensor repeater that is weatherproof?

There is the Smart RF Repeater, though it is not weatherproof; at least not "as is".

Title: Re: x10 eagle eye repeater
Post by: dave w on August 14, 2007, 12:28:02 PM
redruff

Have you tried a passive radiator?
http://www.x10community.com/forums/index.php?topic=12013.0
http://www.x10community.com/forums/index.php?topic=10982.0

Tape 18" length of small gauge wire on the left side of the motion sensor as a test to see if it improves range.