X10 Community Forum

🔌General Home Automation => Other Automation Systems => Smarthome & Insteon => Topic started by: teez67f on September 09, 2007, 03:54:01 AM

Title: All housecode(256) transceiver x-10/Insteon 200ft. range
Post by: teez67f on September 09, 2007, 03:54:01 AM

Here is a link for some products that may be of interest

http://simplehomenet.com/EZX10RF.asp

200 ft. range all housecode X-10 ... but also X-10 to Insteon translator!
You can use all X-10 remotes etc,.. plus ...see link.

Also a few other good ideas on this site-store.Decent price as well all in all.

Title: Re: All housecode(256) transceiver x-10/Insteon 200ft. range
Post by: Brian H on September 09, 2007, 09:09:47 AM

One thing it does not do correctly yet; is process All Units Off commands. It changes them to an All Lights Off command and if you have items on Appliance Modules they will not go off. Yes the range compared to a RR501 is much better. The latest Firmware [12] did fix my issues with A1 not working and P9 to P16 by default being disabled. The original Firmware didn't support any All functions. The new one just got All Units Off mapped to All Lights Off.