X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: iwilliam on October 14, 2007, 09:23:38 PM
-
Floodlight motion sensor maintains maximum sensitivity and daylight operation even when I set it for minimum sensitivity and to work only at dark. Unit is hard wired to electrical. Do I need to turn the circuit breaker off to reset the motion sensor. I have tried turning off the unit with a controller. I have unscrewed the light bulbs so I don't infuriate my neighbors. I only have one of these things and want to add three more but not if they turn on during the day and at any motion.
-
Floodlight motion sensor maintains maximum sensitivity and daylight operation even when I set it for minimum sensitivity and to work only at dark.
Mine works flawlessly.... you might want to try turning the dials that control the sensitivity's in the opposite direction.
-
Just replaced a 5 year old one today. What I found is that after making Any change/adjustment to it's settings, you have to let it settle down for a few minutes before testing it. One other thing, don't have it pointing towards the sun.
-
Thank You as it turned out to be the pointing at the sun problem.