X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => OnAlert => Topic started by: jhoski on November 30, 2008, 10:23:12 AM

Title: Cannot find macro command to arm DS7000
Post by: jhoski on November 30, 2008, 10:23:12 AM

I must be missing something. I cannot find the macro command to arm the DS7000. I've searched forums and see it is an RF command but the only things in my list are All lights On/OFF, Address On/Off, and Address Dim/Bright.
I do have on-alert installed.

What's up?

AHP Version: 3.236

Title: Re: Cannot find macro command to arm DS7000
Post by: Puck on November 30, 2008, 12:58:34 PM

When in the macro editor, where you see the "RF Commands", you should have a selection called "security".

Title: Re: Cannot find macro command to arm DS7000
Post by: Tuicemen on November 30, 2008, 01:21:40 PM

jhoski   Just to elaborate on Pucks post, Security is a separate selection not part of RF Commands!
Also check the tips and suggestions (http://www.x10community.com/forums/index.php?topic=10441.0)  thread for more info!

>!

Title: Re: Cannot find macro command to arm DS7000
Post by: jhoski on November 30, 2008, 11:24:14 PM

It would appear that security does not show up as an option in the macro editor.
I have installed on-alert, and the door sensors and such are working.
Any suggestions?

Title: Re: Cannot find macro command to arm DS7000
Post by: Tuicemen on December 01, 2008, 01:58:07 AM

Have you installed any KR10As (keyflobs)?
Have you any configured any security devices in AHP and told it they were installed in a console? You need to! ;)