X10 Community Forum
🔌General Home Automation => Original ActiveHome => Topic started by: wildrhombus on March 02, 2009, 10:04:22 PM
-
Hi,
I have an old version of Active Home and am trying to get it to run on windows xp without a serial port. I've connected the serial port through to a usb port with an adapter, but I can't seem to get it to work. I've run the communications test on all of the comm ports, but they all fail.
Do I need new software? Is it even possible to get this configuration to work?
Thanks! Taiya
-
In Device Manager. Do you know what Com Port the USB adapter was given?
XP and Active Home can be a problem. Some installs worked other didn't
Many times it was the motherboards comm chip interface.
There is no other X10 software for the CM11A. Can't say about third party ones.
-
Thanks for your response!
The usb port was given com3, I checked in the device manager. And I'm running XP on an older dell inspiron. I guess if there is no other software there isn't much I can do other than try a different computer?
Taiya
-
I couldn't get the CM11A to connect to either of my XP computers, but it does still work fine with an old W98 laptop.
Jeff
-
One thing to try.
Click on the Active Home Shortcut.
Properties
Compatibility
Run as 98/ME
Disable Visual Themes
Turn off Advanced Text Services.
Sometime this helps other times no go.
-
One thing to try.
Click on the Active Home Shortcut.
Properties
Compatibility
Run as 98/ME
Disable Visual Themes
Turn off Advanced Text Services.
Sometime this helps other times no go.
I'm going to try this!!! I'll keep my fingers crossed! :D
-
Yes! Works!!
Thank you!!! Brian! I spoke with "Vanessa" late last night @ 1-8000 #. She sounded stoned or something, I wish she told me about this.