X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: newbie2 on June 01, 2009, 09:42:34 AM

Title: macro "works" but doesn't send signal?
Post by: newbie2 on June 01, 2009, 09:42:34 AM
I have a new eagle eye which seems to work fine. I created a macro for it to run to turn on a light. I trigger the sensor and the macro runs but the light doesn't come on. When I look at the light status in activehome pro, it shows as "ON" but it is off. If I click the lamp "OFF" and then "ON" through activehome, it works. Does the macro not send a signal? The history shows "Extended code 3e 31" for the macro and the light. I also tried switching to appliance non-dimmable am14a but same problem. Originally I used LM14a. Actual unit is RadioShack lamp module (and its works fine directly without macro from eagle eye or directly through room screen.) I am running windows 2000 pro.

Never mind! It looks like there was a conflict with something already in the CM15a. I cleared it and used am14a for the lamp module and it worked.
Title: Re: macro "works" but doesn't send signal?
Post by: hawk1 on June 01, 2009, 10:59:21 AM
Glad you figured it out!   :)%