X10 Community Forum
🎭Entertainment => Problems and Troubleshooting => Topic started by: beboykin on October 27, 2009, 10:24:38 PM
-
I spent hours trying to hook up my Round Video Sender Kit w/Full Powermid with no luck. I have no picture or sound on the receiving end. I have tried EVERYTHING. I know the problem is not with the way I have hooked up on the receiving end, or with the input I have selected. I tested that with my 360. I have changed channels (ABCD), checked all cables, etc. I even got out the manuals for my DirecTV HD DVR and receiving TV to make sure I was hooking everything up correctly there. Called the help number and the girl pretty much hung up on me and emailed me the wiki, which I told her I already had open in front of me. I have no idea where to go from here. Please help.
-
I spent hours trying to hook up my Round Video Sender Kit w/Full Powermid with no luck. I have no picture or sound on the receiving end. I have tried EVERYTHING. I know the problem is not with the way I have hooked up on the receiving end, or with the input I have selected. I tested that with my 360. I have changed channels (ABCD), checked all cables, etc. I even got out the manuals for my DirecTV HD DVR and receiving TV to make sure I was hooking everything up correctly there. Called the help number and the girl pretty much hung up on me and emailed me the wiki, which I told her I already had open in front of me. I have no idea where to go from here. Please help.
Try a known good video source. For instance a VCR or some such. Maybe even a video game. Connect it first to the receiving TV and get a picture, then connect it to the video sender and connect the receiver to the TV. If you can get a picture then, it is quite possible that your DirecTV HD DVR does not send output to the RCA style Video connector when it is set to send HDMI to it's local TV. :'
>!