X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: andybull on November 21, 2009, 10:22:15 AM

Title: HR12A
Post by: andybull on November 21, 2009, 10:22:15 AM

I have an HR12A that I'm going to use to turn on some WS13A switches. At the computer screen I see the on off toggle working when I press the correct HS12A button but the lights don't turn on, When I click on the computer screen switch, the lights work. I did notice that when I try to work the switches from the HS12A, the switch at the computer screen turns on and off, the dimmer next to it does not. When I do it on the computer screen both the switch and the dimmer move and the lights will then turn on or off.

What can I do to the remote in order to make the switch toggle and dimmer on the computer screen come on, or off at the same time?

TIA,

Andy

Title: Re: HR12A
Post by: Brian H on November 21, 2009, 11:35:17 AM

Hardware Configuration Tab
Tranceived House Codes
Make sure the House Code you have the HR12A using. I set to be tranceived. If not the command will not be sent on the power line and only show on the switches icon in AHP.

Title: Re: HR12A
Post by: andybull on November 21, 2009, 09:04:09 PM

Thanks Brian.

Andy