X10 Community Forum

📸Cameras & Camera Software => Legacy non Wi-Fi X10 Cameras => Camera General Discussion => Wired Cameras => Topic started by: retired65 on November 29, 2009, 06:18:19 AM

Title: tv and cams
Post by: retired65 on November 29, 2009, 06:18:19 AM
how can i hook up  2 , or 3-  cams to my tv, and be able to see all of them. is there something special to buy. my cams are sc23a, from X10. thank you
Title: Re: tv and cams
Post by: Brian H on November 29, 2009, 10:14:42 AM
Yes you can by video processors. Many times for security use.
I have seen one that is Black and White signals and four inputs to two outputs.
It can sequence at three second intervals or mix the four and display them each on one quarter of the screen.
I will see if I can find some added data and post it.
Title: Re: tv and cams
Post by: retired65 on November 29, 2009, 11:02:47 AM
thank you brian. i would appreciate that. the reason being i can't get anyone of these cams to work of the internet, with their vanguard software. it just does not work..thank you again. p.s. i tried to remove the software, and it just doe not happen
Title: Re: tv and cams
Post by: Brian H on November 29, 2009, 12:37:17 PM
This is an example of one. There are probably many more; that some here may have used.

I have no idea how well it works.

The Video Inputs and Output connectors are not shown or described. Some may use a BNC connector so an RCA to BNC adapter maybe needed and a cable from the output for the TV Input.

http://www.mcmelectronics.com/product/82-7850