X10 Community Forum

🎭Entertainment => Problems and Troubleshooting => Topic started by: zone6969 on December 22, 2009, 09:23:50 PM

Title: DVD PLAYER
Post by: zone6969 on December 22, 2009, 09:23:50 PM

I NEED THE PROGRAM CODE FOR A RJTECH  RJ-810DVX DVD PLAYER..

Title: Re: DVD PLAYER
Post by: Knightrider on December 22, 2009, 09:26:18 PM

Program code for what?  Kreskin is on vacation.

Title: Re: DVD PLAYER
Post by: -Bill- (of wgjohns.com) on December 22, 2009, 11:47:53 PM

Wow!  Angry face, shouting with ALL CAPS, and expects us to read minds!   :)+   rofl

Lucky to get a response at all!   :o

So, what X10 remote do you have zone6969?

Just in case you don't know any better... this forum is not manned by X10, but other X10 users like yourself.

Be nice, supply some information, and we'll help as best we can.

 >!

Title: Re: DVD PLAYER
Post by: beelocks on December 23, 2009, 07:31:17 AM

Luckily my psychic powers are working this morning.

The code you need is 42761-92G3Z-27&@!2

Simply copy and paste this code using the S2-1217 recoding spraggle cable that came with the optional 57P-34Q coding device (don't forget to utilize the PJ63/D99 software installation package that came with the cable).

Now if I have correctly defined your problem you should then add the T57/tecH dongle to the back of the RJTECH 810DVX and everything should be completely hoopy.

However, that said, if you're trying to use a different device to the one I think you're trying to use then you're probably SOL :)

Merry Christmas, etc

Title: Re: DVD PLAYER
Post by: Mellowmark on December 23, 2009, 08:11:23 AM

Wow Beelocks you lost me at pyschic powers.   rofl


 >!

Title: Re: DVD PLAYER
Post by: bitman on December 23, 2009, 10:12:47 AM

It doesn't seem like you are alone in this quest.

I put RJTECH  RJ-810DVX remote code into google and only found people who need the code, nobody providing any suggestions. This is unexpected.

I suggest you:

A: Use a different DVD unit.
or
B: Use a learning remote to learn the codes from the RJTECH  RJ-810DVX remote assuming you have it or can get one.  The x10 ICON remote for example will not only learn the codes from another remote, but it can display them for you once they are learned.

Title: Re: DVD PLAYER
Post by: Brian H on December 23, 2009, 10:56:44 AM

If you are using an X10 Icon Remote. Try 1209
That is what the code chart showed to RJ Technologies.
http://www.x10.com/pdfs/kbase_iconr_codes.pdf
It that doesn't work try the learning from the original remote as bitman suggested.

I searched the other X10 remotes codes none are for any RJ Technologies brand and most likely will not support one.
Since you didn't give us the X10 remotes model number we are all just guessing here.