X10 Community Forum
🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: flemingmike on January 13, 2010, 03:03:18 PM
-
hi all, i have a macro that says if motion detector is on, then turn light on. the problem is the light doesnt turn on. if i change it to motion detector is on, then turn outlet on, this works. so why will an outlet turn on, but a light switch wont?
thanks! this is driving me crazy!
-
Could be a couple of things.
A Phase issue
A Noise issue
Both
You don't state if you moved the motion sensor with your test So it could be a RF signal issue too. ;)
Topic: X10 Issues? Please Read This First! (Read 40125 times) (http://forums.x10.com/index.php?topic=7951.0)
-
Also try defining the light switch as a LM14A.