X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: sk1pmcgee on January 24, 2010, 06:19:18 PM

Title: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: sk1pmcgee on January 24, 2010, 06:19:18 PM

I have all the above setup...set the MS14A and the Socket Rocket to the samee House Code and Unit Code (A1).
When I click on the switch image on AHP the light works perfectly.  But, When I go passed the MS14A, it registers on AHP and the light switch image on AHP even turns to the on position...but the actual light does not.

Do I have to setup a Macro or can I just have the MS14A and the Socket rocket added seperatley.
I am a newbie and I do not know how to proceed from here....any info you could give me would be great....

thanks

Title: Re: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: Brian H on January 24, 2010, 06:37:17 PM

Tools
Hardware Configuration
Tranceived House Codes. Make sure A is set. Sometimes the default of Auto doesn't work correctly.

Title: Re: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: sk1pmcgee on January 24, 2010, 07:35:49 PM

AWESOME IT WORKED>.....THANK YOU!

Title: Re: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: Dan Lawrence on January 24, 2010, 10:01:06 PM

CM12A????  Don't you mean CM15A?    Just wondering.

Title: Re: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: Brian H on January 25, 2010, 06:42:28 AM

Maybe the CM12AU that is an overseas model.

Title: Re: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: Dan Lawrence on January 25, 2010, 07:57:45 AM

It is. The CM12AU is Australian or New Zealand.

Title: Re: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: Brian H on January 25, 2010, 11:17:09 AM

Goggle seem to point to New Zealand on its hits.

Title: Re: CM12A + ActiveHomePro + MS14A + Socket Rocket = Not Working
Post by: dave w on January 25, 2010, 11:51:15 AM

Quote from: Brian H on January 24, 2010, 06:37:17 PM

Tools
Hardware Configuration
Transceived House Codes. Make sure A is set. Sometimes the default of Auto doesn't work correctly.

Gee, I do so look forward to the day when some ambitious engineer at X10    rofl    feels the "Transceive Housecode" function important enough to finally mention in the manual and (gosh, am I asking too much?) explain it's function.