X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: kirk89 on May 09, 2010, 02:39:18 PM
-
I have the NightWatch wireless low-light b/w video camera on the pan/tilt base with remote. Whenever I have the camera plugged in, our wireless internet in our home stops working. Any ideas on a fix?
-
Both share the same 2.4 GHz frequency band. We frequently see wireless networks interfering with wireless cameras.
Have you tried all four camera channels? One may not cause the problem. On the camera the selector is under a rubber cover plug and the receiver it is a switch.
You maybe able to also change the networks channel to get it off of the cameras channel.
-
I was not aware that switch was there, tried that and it worked, thanks for the help! #:)