X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: Squirrel1162 on May 24, 2010, 10:28:20 AM

Title: Socket Rocket
Post by: Squirrel1162 on May 24, 2010, 10:28:20 AM

I recently purchased two (2) socket rockets along with a lamp module and control unit.  I have the lamp module installed and it works great.  However, I can't seem to get the socket rockets to work at all!  I am running Windows 7 on my laptop.  Any ideas as to what I might be doing wrong?  Any tips, tricks and help will be greatly appreciated.

Title: Re: Socket Rocket
Post by: Brian H on May 24, 2010, 10:48:50 AM

Did you try the default address of A1?
Do you have any phase coupling between the phases in the home? As you may have a signal strength issue between the Interface and the socket rocket.
Try moving the Socket Rocket to a different location maybe on the same circuit as the CM15A Interface as a test.

Links to some common problems and troubleshooting.
http://kbase.x10.com/wiki/ActiveHome_Pro
http://jvde.us/x10_troubleshooting.htm
http://forums.x10.com/index.php?PHPSESSID=fia4somvt646m1f9ar60hogk94&topic=7951.0