X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Wish List => Topic started by: Hardacrefarm on August 17, 2010, 07:12:57 PM
-
Anybody know if X10 has glass breakage sensors available?
If so, where at?
Thanks
-
you could use the DS10a with glass break tape.
-
The X10 GB10A Glass Break Detector was discontinued a long time ago.
-
I used a Visonic Glasstech acoustic glass break detector:
http://www.homesecuritystore.com/p-499-glasstech-visonic-glasstech-acoustic-glassbreak-detector.aspx
in series with a ds10a door switch for our sun room. I used a 12VDC plug-in power supply to
power the sensor. Either the door switch or the sensor will trigger the DS7000 console on that zone.
Hope this helps!
Jack
:)
-
The X10 GB10A Glass Break Detector was discontinued a long time ago.
But the DS10 is still sold by x10 USA.