X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: rdolmat on September 18, 2010, 09:28:55 AM

Title: Credit Card Controller not really controlling...
Post by: rdolmat on September 18, 2010, 09:28:55 AM

Hi folks.

Here is my issue:

I have a lamp set to B1. I have a credit card remote (KR22A) also set to B1.

I press the on button (#1) on the remote....ActiveHome Pro shows ONLY THE SWITCH going up on the lamp, but the DIM slider stays at the bottom...hence the light never turns on.
 :-\

any ideas?

thanks!

Title: Re: Credit Card Controller not really controlling...
Post by: dave w on September 18, 2010, 09:44:07 AM

Do you have the CM15A set up to transceive house code B? (Tools/hardware configuration)

Title: Re: Credit Card Controller not really controlling...
Post by: Knightrider on September 18, 2010, 09:44:34 AM

Lets try something:

Under the hardware configuration, set the transceived house codes to specific and make sure that "B" is ticked.

This has worked in the past for some users.




Knightrider edit:  Dave W posted under me, but additional info provided in my post.  Sorry for the redundancy.

Title: Re: Credit Card Controller not really controlling...
Post by: rdolmat on September 18, 2010, 09:49:02 AM

Quote from: Knightrider on September 18, 2010, 09:44:34 AM

Lets try something:

Under the hardware configuration, set the transceived house codes to specific and make sure that "B" is ticked.

This has worked in the past for some users.




Knightrider edit:  Dave W posted under me, but additional info provided in my post.  Sorry for the redundancy.

ah dang!!! that was perfect!! such a simple solution....thanks so much to both of you!!

 :)%  >!