X10 Community Forum

🖥️ActiveHome Pro => Mobile Apps => Plug-ins => OnAlertMobile => Topic started by: EagleBird on January 05, 2011, 05:03:28 AM

Title: AHP not reacting to onAlert mobile
Post by: EagleBird on January 05, 2011, 05:03:28 AM

I see the page on the iPhone however clicking buttons on the screen has no effect. I see no messages in the activity log. Tried installing a remote but it stays at Waiting for Signal.

I loaded the URL in FireFox/firebug and can see the xml message being returned on button clicks so message is getting to AHP but its doing nothing.

Any ideas on what could be wrong?

Title: Re: AHP not reacting to onAlert mobile
Post by: EagleBird on January 05, 2011, 02:45:54 PM

I added iwatchmobile pro today and that is working. onAlert mobile is still a no-go though.

Here is more information on my setup:
OS: Windows 7 (32bit)
AHP 3.301
Plugins (all at 3.301):
iWatchout
iWatchMobile Pro
SmartMacros
MyHouse
OnAlert
OnAlert Mobile

Thanks.

Title: Re: AHP not reacting to onAlert mobile
Post by: Tuicemen on January 05, 2011, 03:38:31 PM

With all the plug-ins installed reinstall AHP.
The current version of AHP likes to be installed after the plug-ins. ::) :'

Title: Re: AHP not reacting to onAlert mobile
Post by: EagleBird on January 05, 2011, 05:07:58 PM

Yes, found out the hard way that AHP likes being installed last  :) After installing iWatch Mobile pro, AHP started crashing on startup. After trying various things, installed AHP again and that fixed it. Didn't make any difference to onAlert Mobile though. It still shows no activity when used.

Title: Re: AHP not reacting to onAlert mobile
Post by: ErikP on January 11, 2011, 08:11:18 PM

Is your security remote the first security device you added to ActiveHome Pro?

On AlertMobile attempts to mimic the first security code it sees installed on the system.  If you added a sensor first then your application will use the wrong security code when attempting to send commands.  If you added your security console first, this is especially bad since consoles are passive and don't transmit, therefore they don't have a security code to mimic.

An interface to choose which security device to mimic is in the works to allow more flexibility in your setup, but I do not know yet  when it will be ready to ship.

Title: Re: AHP not reacting to onAlert mobile
Post by: rock99rock on January 31, 2011, 01:47:45 AM

I can confirm that AHP is not reacting to OnAlert Mobile commands currently.  I'm on 3.305.  The module it is attempting to control works properly (KR10A).  The green light on the webapp blinks once after clicking any button, but AHP shows no action, no entry in teh activity monitor.  Also, when switching to a different keyfob (other KR10A), the previous one disappeared from the selection list.

Please advise.

-Rock