X10 Community Forum

📸Cameras & Camera Software => Legacy non Wi-Fi X10 Cameras => Camera General Discussion => PanTilt Pro => Topic started by: eyeonu on January 09, 2011, 07:05:20 AM

Title: Problem How pan tilt move
Post by: eyeonu on January 09, 2011, 07:05:20 AM
i have 5 x x10 ninja pantilt and i think they have a problem
when i want to move right or left from the remote they don't move corectly
i have the x10 pantilt in my face and when press to move right he move left and when press on remote to move left he move right
where is the problem for all of them ?
Title: Re: Problem How pan tilt move
Post by: Brian H on January 09, 2011, 09:39:14 AM
Others with Ninjas may verify this
I believe the direction of rotation is from the back looking forward. The way the lens is pointed.
Title: Re: Problem How pan tilt move
Post by: Tuicemen on January 09, 2011, 11:31:59 AM
Others with Ninjas may verify this
I believe the direction of rotation is from the back looking forward. The way the lens is pointed.
Your right Brian,
The pan is from the camera,s perspective.
When your viewing a pan right pans the camera to the right side of the screen.
Left pan pans the camera to view the left side of the Picture image.
 >!
Title: Re: Problem How pan tilt move
Post by: troll334 on January 10, 2011, 09:22:23 AM
Oh yeah,
don't forget that if you hang yours upside down (base toward the sky and cam head toward the earth) like I
did (soffit of the house), Left becomes Right and Right becomes Left (from the cam's perspective). I chose
not to use X10's mounting platform and instead, bolted the base right into the soffit.
Title: Re: Problem How pan tilt move
Post by: tybirdtybird on April 17, 2011, 03:42:47 PM
I went out and got CCTV camera mount arm. I mount pan tilt to it. I use clover wired camera the cold is right on the back of the camera it hits the building when i pan up.