X10 Community Forum

📝Reviews => X10 Hardware => Entertainment Product Reviews => Topic started by: danrose111 on February 04, 2011, 01:43:30 PM

Title: Nstinct Remote works great!!!!!!!!!!
Post by: danrose111 on February 04, 2011, 01:43:30 PM
Hi,
Just joined this Forum to post my experience and review of the Nstinct remote that I just finished
setting up. Bottom Line =  :)%. Took about one hour and everything is working wonderfully.
Here is my setup:

TV = Mitsubishi - WD-65C10
Satellite - DirecTV
BlueRay - Samsung BD-C6500
Audio - external - Sony HT-CT150

Because my TV does not have an HDMI ARC and only a single Digital Audio Coax output I had to connect
the BlueRay and DirecTV  to the TV via HDMI. The Sony Ht-CT150 is connected to the TV via Digital
Audio Coax. Here is the outcome of my Nstinct setup:

TV - pointed the Nstinct and the code was found immediately. After checking all the current TV remote's buttons
on the Nstinct remote the only buttons that I had to use the Learn function for TV mode was input (put on main key of same name), freeze and format which I put under side keys.

BlueRay - pointed the Nstinct and everything configured fine except for Pause button. I then just did the Learn for pause on main key.

DirecTV - pointed the Nstinct and everything configured fine except for a couple of Guide menu buttons (12 hours forward, 12 hours back, Guide options) These are so unimportant but being the nut that I am configured them under Learn and side keys.

Sony Ht-CT150 - pointed the Nstinct and 95 percent was auto configured. I had to Learn the Soundfield and up/down/left/right/OK buttons which I put under main keys.

So to conclude I am very happy with the Nstinct and would recommend to anyone I know.

Enjoy the Superbowl !!!!!!!!!!!!
Title: Re: Nstinct Remote works great!!!!!!!!!!
Post by: sazzam on December 07, 2011, 03:10:16 PM
I have a DirectTv HD receiver. I am having trouble with channels that are more than one digit.

Example: Channel 7 works immediately.
Channel 295 you have to keep the remote pointing to the receiver because the Nstinct pauses between each digit.

Do you have the same problem?