X10 Community Forum
🔌General Home Automation => Automating Your House => Topic started by: chuckp on February 23, 2011, 10:54:52 PM
-
Could someone explian how the StyleSwitch works? Except for a red LED it does nothing.
-
What is a Style Switch?
Are you thinking of the SS13A Stick A Switch?
http://www.x10.com/automation/x10_ss13a.htm
It is a RF device that sends commands like other X10 remotes to a transceiver.
TM751 and RR501. Controllers like a CM15A or Security Console.
The transceiver converts the RF commands to a power line signal. That controls X10 modules on the addresses it is set to.
Pushing a button on it will not do anything except flash the RED LED, if its RF signal is not received by a transceiver and sent to a properly addressed module over the power lines.
-
Could someone explian how the StyleSwitch works? Except for a red LED it does nothing.
Give us the correct name, the crystal ball isn't working. Are you asking about the X10 Pro "Decora style", "slave" switch in a 3-way circuit, which does have a non functioning LED?
http://www.x10pro.com/pro/pdf/xpss.pdf
If so, it is the second switch in a X10 3-way lighting circuit. You can not use a standard 3-way switch for the second switch, nor will the XPSS slave switch function in a circuit without the master XPD3 (incandescent bulb only-dimable) or XPS3 (flourescent, LED, etc. - non dimable).
-
Ok. It's working fine. Thanks.
-
Give us the correct name, the crystal ball isn't working.
-
Gee. I love it when we fix something and don't know what we fixed. ;)
-
rofl