X10 Community Forum
🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: spam4us on April 18, 2011, 09:22:17 PM
-
Just noticed this. Whenever I set a flag either on or off, it takes about 4 seconds until the next command executes.
Example.
macro Trigger e2 on (ms16)
9:03:00 Turn f2 on (flood light)
set flag3 on
9:03:04 turn on d9 (chime upstairs)
9:03:05 turn on f3 (inside light)
9:03:06 turn on d10 (chime in basement)
set flag3 off
9:03:10 Turn f4 on (basement light)
What happens is in the activity monitor, there is a 4 second time lapse between the Turn f2 on and the turn d9 on. Then there is another 4 second time lapse between the Turn d10 on and the turn f4 on.
I am running version 3.206 with no problems and have been for the last 2 years or so.
Any ideas?
There are no delay commands in the macro.
Thanks in advance for any help you can provide. I appreciate it.
-
Just noticed this. Whenever I set a flag either on or off, it takes about 4 seconds until the next command executes.
Example.
macro Trigger e2 on (ms16)
9:03:00 Turn f2 on (flood light)
set flag3 on
9:03:04 turn on d9 (chime upstairs)
9:03:05 turn on f3 (inside light)
9:03:06 turn on d10 (chime in basement)
set flag3 off
9:03:10 Turn f4 on (basement light)
Don't you mean 3.
What happens is in the activity monitor, there is a 4 second time lapse between the Turn f2 on and the turn d9 on. Then there is another 4 second time lapse between the Turn d10 on and the turn f4 on.
I am running version 3.206 with no problems and have been for the last 2 years or so.
Any ideas?
There are no delay commands in the macro.
Thanks in advance for any help you can provide. I appreciate it.
Don't you mean 3.306? There's no 3.206
-
No. It's 3.206. Right there on my "Help/About" page.
-
No. It's 3.206. Right there on my "Help/About" page.
Are you running the US version, or the European version?
-
it's the U.S. version. I've had it for 2 or more years running on an xp desktop with no other problems.
-
I know it will be a bit of a problem, but delete the macro and build it back. That has worked for me on at least one occasion.
-
it's the U.S. version. I've had it for 2 or more years running on an xp desktop with no other problems.
According to X10's revision history, there was no 3.206:
http://www.x10.com/support/rev_ahp.htm
In any case, I still recommend upgrading to the latest version, which (as of this posting) is 3.311.
-
I believe 3.206 resulted in adding one of the plug-ins to 3.204, what the plug-in is covered here in another thread.
-
On the Help/About page it says "Last Update 9/11/2006 and Version 3.206. I'd post a screen shot of it here but it also has my name on it which I don't want to share.
I've deleted the macro and rebuilt it. Still the same result (4 second pause).
How do I get the updated version? Where do I go to get it?
thanks
-
How do I get the updated version? Where do I go to get it?
Version 3.311 Updated 04/14/2011
* AHP: Reflector logging and fixes.
* AHP: UX17A configuration dialog updates.
* AHP: Updated to use 2010 Visual C Runtime Libraries.
You can download the new version here:
http://www.x10.com/support/support_soft1.htm
Here is a link to the revision list:
http://www.x10.com/support/rev_ahp.htm