X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: vlong on April 27, 2011, 04:00:23 PM
-
Recently I discovered the "CHIME" does not sound when Open any doors or windows it happened twice to fix it I have to Arm then DisArm the console (AS1200). Any one have this problem??
-
So it is not any perticular Zone? When the chime goes silent. It could be any of the zones being opened?
-
So it is not any perticular Zone? When the chime goes silent. It could be any of the zones being opened?
all doors windows are closed ??? i did check all Zones all are silent,,,,,, also it does happen again yesterday evenning like i said i have to arm and disarm the console then the console will work normal agin i'm very sure will happen again.
-
I have had this problem with couple of door sensors (but not all in same time). What I found is that the rf signal reaching these sensor were borderline weak... just enough but not quite. Most of the time they work, 1 out of 5 times they don't.... when they don't.. they stay off for a while. Interestingly, I never had problems arming the system with these problem sensors. I had to rotate or reposition (it was on metal... rebar I would guess) in my house. I have 10 door/windows sensors deployed and will eventually have a total of 17 seventeen.
-
well' even my sensor 5 feet away from console won't do quart i have to arm and then disarm the console to have it work normal.
-
Sounds more like another console problem.
-
Sounds more like another console problem.
Brian,
i have no idea other then that everything working ok just keep on "arm/disarm" to fix it Ooh!! well.
thanks
-
Well. We will make a note of your findings and pass them on to any other user reporting the same problem.