X10 Community Forum
📝Reviews => X10 Hardware => Home Automation Reviews => Topic started by: Brian H on November 30, 2011, 01:23:00 PM
-
Smarthome X10WS467D Toggle style Dimmer Switch. Revision 5.05 Date Code 1026
Module is two way.
Has a built in Beeper Sounder.
No local control sensing current.
36 LED 3.6 watt light OK
Ecosmart 9 watt dimmable OK.
Load:
Ecosmart dims nicely.
In AHP Choosing a WS467 from the Old Before Soft Start list can control it.
Using the On then dim down method. As Smarthome choose the %dim command AHP can not do.
If turned On locally. It sends an On to its address for AHP to process.
If turned Off locally. It sends an Off to its address for AHP to process.
If dimmed or brightened locally. It sends a %dim to its address. AHP can not understand.
Dimming to 0% will send an Off to its address for AHP to process.
Brightened to 100% will send an On to its address to AHP to process.
It responds to All Lights On, All Lights Off and All Units Off
-
Update. Today I looked at the Smarthome Site and the new price is $29.99