X10 Community Forum

📸Cameras & Camera Software => Legacy non Wi-Fi X10 Cameras => Camera General Discussion => Wireless Cameras(non IP) => Topic started by: 713it on March 04, 2012, 10:54:18 PM

Title: Need help for new installs
Post by: 713it on March 04, 2012, 10:54:18 PM

Hi Everyone,
I was hoping that the forum can shed some light on the best way to achieve my goal in my install.

I have 3 locations that i would like to monitor (2 stores and my house).
What would be the best or ideal install to monitor, record and if possible send the 2 store feeds to my house?

Thank you in advance for your help.
Tony

Title: Re: Need help for new installs
Post by: kenrad on March 05, 2012, 04:50:04 PM

I would look at IP cams and blue iris software for this.  x10 cams offer poor resolution and their software is limited


 >! Ken

Title: Re: Need help for new installs
Post by: X10 Repair Depot on March 06, 2012, 08:27:42 AM

Quote from: 713it on March 04, 2012, 10:54:18 PM

Hi Everyone,
I was hoping that the forum can shed some light on the best way to achieve my goal in my install.

I have 3 locations that i would like to monitor (2 stores and my house).
What would be the best or ideal install to monitor, record and if possible send the 2 store feeds to my house?

Thank you in advance for your help.
Tony

If you are talking about our wireless non-IP cameras, you can do what you are asking but as kenrad said, the resolution is not so good and the software is limited.

However, our Airsight IP cameras are the way to go for your application. These have good resolution, IR night vision, and the ability to be viewed from any location - including a smartphone. The included software will work for this application.