X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: pantasos on July 10, 2012, 01:06:18 PM
-
Hi all
my project is
motion sensor: MS13E (address A2 and off during the day, light / dark sensor on)
AW12: Address A4
AW12: Address A5
I would like to ask what address should I give to the work I've long in the photo below, and if you need to make some adjustments in MS13E to run the macros only at night THANK YOU.
B:(
(http://s8.postimage.org/u42d4b2lt/AHP1.jpg) (http://postimage.org/image/u42d4b2lt/)
(http://s12.postimage.org/u1kov3mmx/AHP2.jpg) (http://postimage.org/image/u1kov3mmx/)
-
Your macro address should be a2
Remove the referance(sends) to a2 in the macro and the first delay.
You'll need the AHP smartmacro plug-in to do conditional macros (if it is after dusk)