X10 Community Forum

📱X10 WIFI => 🗯General Discussion => Topic started by: Frank Melis on September 29, 2018, 10:37:45 AM

Title: WM100 on 220V for Europe ?
Post by: Frank Melis on September 29, 2018, 10:37:45 AM

Is the WM100 also available with a European plug and on 220/230 V ? If not, are there plans to make this device ? What would then be the availability date ?
Would the actual module work when it is connected through a transformer 220V-110V, i.ow. do the X10 commands pass through the transformer ?

Title: Re: WM100 on 220V for Europe ?
Post by: Brian H on September 29, 2018, 11:11:00 AM

We are a User to User style forum. We have no direct input from X10 {Authinx}. If it is planed we probably have no information on it.

The label on the back says 120VAC 60Hz. Europe is 50Hz.. So it may have issues Europe.

The X10 power line signals will not pass through a step down transformer efficiently or not at all..

I suggest you read the threads here on exactly what it can do and its limitations.

Title: Re: WM100 on 220V for Europe ?
Post by: Frank Melis on October 01, 2018, 10:23:15 AM

Thanks Brian for the answer.
I had the TIP10RF from Marmitek and that worked fine until last year, when the support on the app stopped. Now the app is no longer available in the AppStore for download, so the TIP10RF is useless because I cannot communicate with it.
Is there anybody who knows a similar solution (hardware + app) that will work in Europe too ?

Title: Re: WM100 on 220V for Europe ?
Post by: Tuicemen on October 01, 2018, 10:29:58 AM

if you have a cm11,15,or 19 and a PC or SBC there are lots of possibilities.

Title: Re: WM100 on 220V for Europe ?
Post by: petera on October 01, 2018, 01:11:34 PM

Quote from: Frank Melis on October 01, 2018, 10:23:15 AM

Thanks Brian for the answer.
I had the TIP10RF from Marmitek and that worked fine until last year, when the support on the app stopped. Now the app is no longer available in the AppStore for download, so the TIP10RF is useless because I cannot communicate with it.
Is there anybody who knows a similar solution (hardware + app) that will work in Europe too ?

Not sure what device you're trying to get the TIP10RF working on but here's a downloadable version for Android
https://m.apkpure.com/tip10rf/com.TIP10RF.X10

For Apple device I'm using iOS 12 and the original app I installed on it still works fine.

Did you change over device and do a backup/restore so you could restore all you apps to your new device. A little more info would help here.

While further development may have halted the app and device still work fine

Title: Re: WM100 on 220V for Europe ?
Post by: Frank Melis on October 04, 2018, 09:24:11 AM

I am using an iPhone 6 with IOS12. When I go to the AppStore and look for the app, it's no longer there. Also in Purchased, I can't see it.

I'll check in my iTunes library if I can find a backup with the app in it. In that case, I can make a new backup, and try to copy the app from the old backup, and restore.