X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: bf9ys02 on January 11, 2020, 10:32:27 PM

Title: Updating the CM15A Hardware Configuration
Post by: bf9ys02 on January 11, 2020, 10:32:27 PM

Should I see a progress indicator when I click Update Interface?

Title: Re: Updating the CM15A Hardware Configuration
Post by: Tuicemen on January 12, 2020, 07:30:23 AM

Nothing appears on the CM15. AHP from my recollection should display a small bar which slowly turns green.
If I remember right, it is in the bottom right off the AHP screen.
I've not used my CM15 with AHP in a few years now.
 >!

Title: Re: Updating the CM15A Hardware Configuration
Post by: SkipWX10 on January 12, 2020, 05:59:41 PM

Depending on how complex your setup is, you may not see a progress bar, as it takes a very short time to update. I remember that 'clear interface memory' took longer and showed on the status bar...which IIRC is on the bottom left ;-)

Also, I think there are settings in preferences (under Tools) that allow you to get confirmation dialog popups when doing things like deleting, clearing and updating

Title: Re: Updating the CM15A Hardware Configuration
Post by: bf9ys02 on January 25, 2020, 02:08:48 PM

There are options for showing download complete and clear interface complete but not for interface updated.  So there was probably never a display.  Thanks.