X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: tim pickering on August 17, 2005, 11:07:54 PM
-
Has anyone any experiance or suggestions
on connecting 120Vac to 12Vdc tranformer
for landscape lighting? It is connected to
outside 120Vac outlet (GFI type). I was
told modules and/or outlets would not work
through or past GFI circuits. The only way
I see to make it work is replace the GFI
outlet with a X10 outlet. Any suggestions...
Thanks in advance, ...Tim
-
I have 5 landscape lighting transformers
actuated with X10 Appliance Modules. They're
all plugged into GFI protected outlets and
all have been running satisfactorally for 8
years.
I understand there is some newer type of
recepticle safety protectors - can't remember
the name - which may block X10 signals.
-
I to have my landscape lighting plugged into
an appliance module and that is plugged into
a GFI outlet. It has been working fine for
many years.
Jim
-
Followup on my previous response: The new <BR>type of recepticle safety device I mentioned
is the AFCI (Arc Fault Circuit Interrupter).
See: http://members.tripod.com/~masterslic/afci.html
[roger1818: Fixed broken link]