X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: keith shankle on October 08, 2005, 04:09:20 PM
-
I am hooking up a XPDI3 master switch and a
XPSS slave switch. On the master I hooked
the black lead to hot, the blue lead to
load, the red to the screw terminal labeled
switch on the slave. Also on the slave I
hooked the screw terminal labeled line to
hot. The white wire is not used. The
lights do not work. What am I missing?
-
The XPDI3 needs a Neutral Wire to work. So
the White must be connected to the Neutral
feed wire. If you don't have a Neutral in
the switch box that switch can not be used,
untill one is run into the box.