X10 Community Forum
🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: nswint on March 26, 2005, 12:32:58 AM
-
The delay feature doesn't calculate properly.
It calculates using the default 00:05:00
instead of what you want to put in. You have
to add several delays in and delete to get
the proper time. Currently the delay will
only set at 5 minutes. You have to manually
set it to anything else
-
I am not experiencing this problem. I have
several delays set at other than 5 minutes.
I have several set at 1 minute and others
set at 10 minutes. They all work fine.
-
Noah: What exactly do you mean by the delay
not calculating properly? The "Default
Value" is just that, it's only meant to
assign a value to the variable. You have to
start someware - if you want a different
value then you can put what ever you want
in there. If you want to place a
different "DEFAULT" value in then goto
Preferences/Smart Macros and change it. The
computer/AHP program can't read your mind
to find out what you want to do.
-
Noah, I have delays anywhere from 20 seconds
to 1 hour. They seem to work fine, although
the 20 second delay is a few seconds less or
more, but not by much.