X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: X10 Pro on June 09, 2005, 07:53:03 PM
-
I know this has been long-awaited. There are
some good things in this version:
- Fixed a crash using Merge file on files
with deleted items.
- Added complete Intro Wizard.
- Added Clear History to Tools menu
- Added ability to start a program or web
page from a macro (run from PC-only)
- Added ability to send arbitrary extended
code commands from a macro
- Added ability to send arbitrary standard
commands from a macro
- Added ability to send arbitrary address
commands from a macro
- Fixed some problems with event recording
in Activity Monitor.
- Fixed some incorrect tool-tip and dialog text
- Keyboard short-cuts work again
- iWitness: Fixed crash changing video
framerate on some systems
- iWitness: Fixed problem in Image Viewer
where clicking Video multiplies video thumbnails
- iWitness: Added video loss detection/restart
- iWitness: Added way to delete files from
viewer
- iWitness: Added Save As and copy to viewer
- iWitness: Fixed problem with delays in
camera/video macros
To use the new Macro features, change the
"Room" list in the Macro Designer to
Advanced. For the PC-executable command, you
can put a path to an EXE or COM file, or just
put in a URL to open a browser to that page.
We'll be starting the beta for the Internet
plug-in soon, so we probably won't have
another update until after it's released.
You can download the update directly from here:
http://software.x10.com/pub/applications/activehome/ahp_updt.exe
Revert to previous version using:
http://software.x10.com/pub/applications/activehome/ahp_updt_186.exe
-
I had to download the update then install.or
it wouldn't take!
I still get the icon at the top of the page
stating there is a update available (in xp
as well as 98SE) but at least no pop up!If I
go to help and about it states I'm now at
3.187. I'll leave it running over night and
see if I find any thing else! Looks good so
far on XP!
-
It locked up when I tried to download it
from the program. (I think Norton doesn't
like it anymore.) I had to load from the
link and turn off my firewall but I did get
it downloaded.
tuicemen: The update icon at the top of the
page remained for me, also. I don't think
the flag was reset when loading from the
link. The icon went away when I did a check
for updates.
-
Thanks steve that did it!
-
I have the install get hung on the
xsetup.dll file download. I have rebooted,
and retried, same result. I also tried to
uninstall X10 and reboot, and it still gets
stuck at that install point.
I tried an older version, same result
Any ideas? This has worked fine in the
past. I am running Windows server 2003 with
SP1.
Thanks!
-
Britt: Are you logging in with administrator
rights? I can't think of why the install
wouldn't proceed unless it wasn't being
allowed to write the files. Did you try
downloading the update installer, instead of
doing it from within the program?
-
Yes, I have administrator rights, and did use
the direct link. I have now uninstalled the
program, so I cannot upgrade from within the
program.
It still begins the download, and then hangs
on that file. This has worked every time on
this machine before, same user, etc.
Is there any way to download the entire
package and install it locally rather than
forcing it to go across the net file by file?
Thanks again for your help
-
A few more problems with 98SE.
1:Iwitness will no longer work says "va11a
isn't connected" but it is and correct diver
is installed.
2:AHCMD.exe (SDK)still won't work
3: The settings under peferences still
revert back to the default for Smartmacros
(after AHP restarts) for Iwitness they don't
stick at all (not that that matters since I
can't use it anyways)! :(
-
I am running version 3.186 and when I go to
download update activehome stops running
and disappears
-
I try to update with the check for updates,
or the icon that pops up when I start it and
just like 1/3'rd of my timer's - nothing
happens.
Can I go to something like "support -
downloads - upgrades" and get this update???
If you want - I can send you my file and let
you know what timers work and which ones
don't. This is getting kinda silly - does
the new update fix the update problem???
-
As in my message a few down, I am still
having the same problem, which sounds
related to the problems mentioned by Pete
and David below.
Can anyone at X10 help us out, either by
fixing the problem, or giving us a way to
download the package as one unit and
running the install locally?
Thanks!
-Britt
-
Just an update - I just got in a Smarthome
Powerlinc USB interface and it works great
using the Home Sear (purchased extra) and
the Smarthome Manager Plus software (it came
with that) - They both work with the Leviton
and have the special commands to set their
relative, absolute, and on/off properly.
Also the timer's work great. Everything I
setup worked the first time & I've had no
problems. Now I just need to figure out
what to do with the extra 2-3 hours per day
I have freed up by not having to screw with
X10's stuff - Pete.
-
Well, it’s coming up on one year I’ve been
trying to get the CM15A working. Right now,
I use the CM11A for 98% of my home control
and I’m using the CM15A for the other 2%. I
needed one more dusk/dawn timer and I’m out
of memory on the CM11A. Well, the CM15A
messes up about every 2 weeks. So I caved
and just purchased Smarthomes Powerlinc
controller. I read in here where people
made the switch and it works. I’ll post
when I have everything combined from my
CM1XA controllers into the Powerlinc
controller and have it running. After 11
months of unreliable performance on the
CM15A, I felt X-10 left me no other option.
-
This is my last cry for help. I have tried
to speak with the help desk but they just
give me the text book answer even though I
have tried it. I have a CM15A. I have this
version of ActiveHome. I downloaded it from
the link and a second that was attached to
an email from the help desk. It seems to
install fine. ActiveHome runs fine from
what I can tell. When I plug the CM15A in,
it recognizes a USB device but it doesn't
find the driver. I cannot point it to
C:\Program Files\Common Files\X10 because
ActiveHome does not install anything into
this directory. I am an administrator on
this machine. Is this version broken? Has
anyone else done a new installation and
checked if it created a C:\Program
Files\Common Files\X10 folder? I am about
to give up on this CM15A because I cannot
find a driver. Why can't you just put a
link to the driver. If anyone can send me
the xp driver for the CM15A I would
appreciate it. david@themcardles.com -David
-
David McArdle: Can you look at the properties
of the ActiveHome Pro shortcut on your Start
Menu? What's the Target of the shortcut?
If the ActiveHome Pro program runs, the
Program Files\Common Files\X10\ directory
must exist somewhere on your computer -- the
files there are required for AHP to run. If
the folder is not on the C: drive, maybe it's
on another drive?
Also, when you plug in the CM15A, how is it
listed in Device Manager under Universal
Serial Bus Controllers? If the driver is not
installed it will appear as "USB ActiveHome
Interface." If the driver is installed it
will be "X10 USB ActiveHome (ACPI-compliant)."
If it doesn't show up as either one of those,
try unplugging it from power and USB,
removing the batteries, then connecting the
USB and plugging it in again.
-
Gee...seven months later and the CM15A forum
shows it's STILL having problems ! I gave up
in March 2005 and got a Smarthome
Powerlinc. It's been working ever since !
Like one guy said, 2-3 hours more at night
to do more productive stuff !
-
Turns out I had been sent the wrong 1.4.2
version of the software (even though it was
zipped up with a different name). I suppose
I should of saw the version earlier on the
splash startup screen. After another call
with the help desk, I got the new version
and it works now.
-
$169 for system $1000 for installation and
setup.
Plane and simple I need the camera to
RECORD not just turn on every time the
computer turns on. A lot of power outages
here in Florida so I need it to record when
the power comes back on.
Also it won't let me update due to wrong
file size.
Also picture quality with capture device on
TV ok on Computer worthless past 15'.
-
I didn't read all these posts before
buying. Problems right off the start!
Should I return it all or eat it...
First: this update is causing AHP to
fatally crash...Error Signature-AppName:
activehm.exe; AppVer:3.0.0.187;
ModName:ahp.dll; ModVer:3.0.0.187;
Offset0018d60e...when accessing help in at
least the hardware configuration window.
Second: CM15A USB connection to XPPro
works only when all power (batteries too!)
is removed from CM15A prior to connecting
the CM15A to the computer. Error received
from XPPro: USB device malfunctioned. As a
result, AHP version 3.186 & 3.187 do not
recognize the CM15A.
Help X10Pro...or anyone else.
Thanks in advance
-
Kevin: The crash accessing help will be fixed
in the next update. It sounds like we should
replace the interface. If you call or e-mail
support they can arrange that for you.
-
Is this the same "Next Update" that we have
been promised for more than two months?
-
Will this next update also fix the problem
where the install will not complete because
it gets stuck on the xsetup.dll file download?
Is there any way to get a full copy of the
install file that can be run locally?
Thanks!
-
What about the sporadic Activity Monitor?
-
Just installed 3.186
Tried to upgrade to 3.187 - software crashes
every time. This is not a good start. Is
there a fix available?
-
Mike: Use the following link to download and
install the update directly:
http://software.x10.com/pub/applications/activehome/ahp_updt.exe