X10 Community Forum

📸Cameras & Camera Software => Camera General Discussion => Topic started by: AJR on November 21, 2004, 10:49:28 AM

Title: all cams work on new code - plus a bonus
Post by: AJR on November 21, 2004, 10:49:28 AM

Thanks for the help ( telling me where the
hidden code switch was )
Next found out my 5 in 1 remote was not
working properly... when i would change
house codes ( x10  C  3 ) it did not work ,
then when i went to my firecracker remote on
the screen the c 3 code worked, along with
the c 2 and the c 1 worked grate ... so i
figure once i get the usb/capture device and
the new software update i will be up and
running.

Title: Re: all cams work on new code - plus a bonus
Post by: Brian H on November 21, 2004, 11:11:06 AM

Glad to hear that it works. One point the
unit code one also will turn on and off the
appliance relay in the tranceiver. So you
will hear it go clunk.