X10 Community Forum

📸Cameras & Camera Software => Camera General Discussion => Topic started by: al on October 31, 2005, 10:22:17 PM

Title: Flood Cam & Chime
Post by: al on October 31, 2005, 10:22:17 PM

I have a FloodCam and Chime set to same
address.  During the day when flood lights
do not come on the chime works when the
camera turns on.  At night when the flood
light turn on with the camera the chime does
not work.  Any suggestions will be
appreciated.  thanks

Title: Re: Flood Cam & Chime
Post by: TheBigOldDog on November 10, 2008, 10:44:03 PM

I have my chime set to the same address as the Flood came (e.g., A7) and it sounds every time the Floodcam detects motion - day or night. Check your addresses. Send the "on" command to your Floodcam with a palmand confirm the chime sounds. If not, you eithe rhave a defective Floodcam or chime. Try a lamp module set to the Floodcam address and she if it also fails at night. That would tell you the floodcam is bad...

Title: Re: Flood Cam & Chime
Post by: steven r on November 11, 2008, 01:39:46 AM

I don't think al has ever been active on this forum. His post of Oct 31, 2005 was imported from the old forum.