X10 Community Forum
📸Cameras & Camera Software => Camera General Discussion => Topic started by: ken kloman on November 16, 2005, 08:16:39 AM
-
I know that you can use the remote control
to switch between up to 4 cameras, but is
there a device that would do that for you?
I imagined that you could have up to 3
cameras (#1, 2, & 3) with the an "automatic
sequencer" as choice #4. If you selected #4
it would rotate through the cameras, one at
a time, for you at some predetermined
interval. If you saw something you wanted
to see more of, you would just select 1, 2,
or 3 on the remote to fix on that camera.
The sequencer would then be off, just like
all the other cameras are off when you
select one. I have a situation that does
not allow for computer use. Any ideas??
-
I thought the same - and spoke to a support
person today - what you can do is setup
multi motion detectors that will switch the
camera being recorded when motion triggers
the detector programmed to that camera -(see
setup instructions to program the detector)-
other than that - if there is another way to
do it - I would like to know also.
-
buy a quad!