X10 Community Forum

🛡Home Security => Home Security General => Topic started by: len on May 13, 2004, 01:06:48 AM

Title: Daytime Monitoring & Zones
Post by: len on May 13, 2004, 01:06:48 AM
Two questions:

1. Can I set different zones and have some
be armed and some not?  For example, we're
in the backyard pool at night.  I want to
arm the front of the house but not the
patio door.

2. I work at home.  I would like to have
the system not armed for alarm but beep if
a door or window is opened.  Can I do that?
Title: Re: Daytime Monitoring & Zones
Post by: Kishore on May 13, 2004, 06:42:05 PM
1. you can arm with the patio door open and
press bypass on the main console. All
other sensors will be armed except the
patio door.

1. In run 2 mode the console shall beep if
any door/window is opened.
Title: Re: Daytime Monitoring & Zones
Post by: Security Expert on May 25, 2004, 04:55:17 PM
Keep in mind the Bypass function is only
good for 90 minutes maximum. If the bypassed
zone remains open longer, it will likely
trigger a false alarm.