X10 Community Forum
🔌General Home Automation => Automating Your House => Topic started by: matt on November 08, 2005, 08:58:26 PM
-
need help wiring 4 way switch system with
x10 decorator wall switch(es) Any advice
would be greatly appreciated.
-
One Master [WS12A or WS13A]and three slaves
[WS14A]?
-
a 4 way switch system involves 3 switches.
You pull power from one 3-way switch, goes
to the 4-way, and back to another 3way and
finally to light. (one method) I have
power going into a WS12A to a conventional
4-way, then back to another WS12A, finally
to light. But for some reason this isn't
working.
-
I found something close to what I believe
your trying to descripe to me as a slave.
X10 calls it a companion switch.
Thanks for the information Brian!
Greatly appreciated. Hopefully I didn't
damage the other x10 switches.
-
Yes the WS14A is the decorator companion
switch.
-
http://home.howstuffworks.com/framed.htm?
parent=three-way.htm&url=http://www.act-
solutions.com/kingery06.htm
-
Thank you all for the help. I found the
switches and wiring diagram for my setup.
Maybe this will help others in the future.