X10 Community Forum

X10 Zone => Contractor General Discussion => Topic started by: terry on January 01, 2006, 10:51:50 AM

Title: Control X10 with Crestron
Post by: terry on January 01, 2006, 10:51:50 AM
I need the RS 232 protocol or better yet,
an example of the command string to control
X10 Devices from a Crestron Control
Proccessor.  Anyone?
Title: Re: Control X10 with Crestron
Post by: Kelly Parke | Program Manager on January 09, 2006, 06:32:27 PM
X10 offers extended code format available at
http://www.x10.com/support/support_manuals.ht
m