X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: cptjack1 on July 23, 2006, 08:17:47 PM
-
I am having problems with my camera XX16A. I got my system yesterday and had trouble getting started. It was working earlier today and now when I go into ActiveHome Pro to see my camera, all I see is the ActiveHome Professional video monitoring logo. All cables are hooked up and on correct channels. Also, when I hook it up to my TV I can't see anythign either. Any suggestions? Thank you for any input! :)
-
An XX16A is NOT an X10 device, which is why AHP does noy recognize it. In fact the XX16A is not made by SmartHome, or any X10 related manufacturer.
-
XX16A is an X10 product. It is the single Xcam2 Instant on camera part number. Usually part of a camera kit though can be bought as an add on to an existing system.
-
I see similar issues with iWitness where it would not be able to display an image but I know that the video signal is there because it shows up fine when connected to a TV. I was able to get it to work after restarts. I do not know whether the problem is in iWitness or the AHP. More likely it is iWitness.I thinkthat the V11A video-USB interface can also be a problem.
-
I would start with the basics
1 Start with the camera hooked up to a TV that is set to the same channel as the video receiver
2 For testing purposes move the camera close to the video receiver
3 Make sure the camera and receiver are set to the same channel
4 Make sure that both the camera and the receiver have power
5 Make sure that the camera's power supply is set to the same unit and house code as you have
set up in AHP
6 If you are still unable to get it to work try using something other than AHP to turn the camera on.
7 If you get the camera to work with a TV you should now be able to move the connection to the VA11 and view it with the computer.
8 If it is now working try moving it to the desired location. If it stops working when you move it you may need to relocate the receiver or at least reposition the antenna.
-
XX16A is an X10 product. It is the single Xcam2 Instant on camera part number. Usually part of a camera kit though can be bought as an add on to an existing system.
Just out of curiousity, why did a Google search of XX16A yeald NO links to any X10, Smart Home, or Automated Outlet, and a search of X10. com itself got no hits? I didn't llook at X10 Pro, though.
-
I have no idea. Only place I fond it was in the downloadable manuals on X10 Support.