Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Grandpa David]

Has anyone devised a way (macro?) where a module can be turned on/off as the system is armed or disarmed...a visual indicator that the signal was indeed received??  I have all the AHP add-ons now, but am not very proficient with them.

Thanks!

[JMac]

I can "transmit" and arm the security console (and also incorporate a "dummy" switch or a light) with a macro.  That way I can see on the screen that the macro ran, but the security icon on AHP will not change.

[Tuicemen]

This can be done very easily BUT you MUST follow these steps!

[li]Add security remote or key flob
.[/li]
[li]Make sure the check box that states "this device is installed in a security console" is checked
.[/li]
[li] Install the security device
.[/li][/b][/color][/list][/size]Now when you click arm the little icon (bottom left of AHP) will change from unlocked to a red house this also adds the options instant arm /disarm and some others to the security commands
NOW:

[li]Make a macro
.[/li]
[li]Select security
.[/li]
[li]Select the remoteor key flob
.[/li]
[li]Select the trigger in this case "instant arm"
.[/li]
[li]Drag the light you wish to activate into the macro
.[/li]
[li]Make sure the state of the light is set as on
.[/li]
[li]Save the macro
.[/li][/b][/list]
Make another macro for the disarm and save it
Note:[/b] the light will not come on/off instantly it takes a few seconds

***Cheers***

[/color][/i]

[Grandpa David]

That's exactly what I was trying to do.  Thanks much!!

One more question though... ;  since you're programming for me, will each remote or key fob require its own macro, or do you have some magic for that one, too??

[Tuicemen]

You'll have to make the macros for each security Device!
There is another way but this is the easier way!