Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Using remotes with just a CM15A  (Read 2412 times)

pvignola

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 37
Using remotes with just a CM15A
« on: November 08, 2006, 09:57:13 AM »
I have searched the posts and it seem that I don't need anything else to use a remote with my ActiveHome and CM15A system.  Can anyone tell me for sure if this is true?  I would like to use the CreditCard or Keychain remotes with my CM15A.

Thanks for your help!
Logged

KDR

  • Hero Member
  • *****
  • Helpful Post Rating: 53
  • Posts: 758
    • Home Automation Chat
Re: Using remotes with just a CM15A
« Reply #1 on: November 08, 2006, 10:10:50 AM »
Thats all you need but...

You may find that range is an issue. You will have to give it a try and see if it will work in all the areas you want it to. If not do a search on the board for range issues and you will find lots of info on the subject.

Be sure you have AHP set up to transceive the house code you are using and then upload to the CM15A.
Logged
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

pvignola

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 37
Re: Using remotes with just a CM15A
« Reply #2 on: November 08, 2006, 10:32:29 AM »
Thanks for the quick response.  I have an RF repeater that came with my package from X10.  I will make sure I include the proper house codes.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.