Please login or register.

Login with username, password and session length

Author Topic: Is There Any Way to Display Swimming Pool Temp in AHP?  (Read 7013 times)

TommyHo

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 12
Is There Any Way to Display Swimming Pool Temp in AHP?
« on: November 10, 2006, 07:00:45 PM »

After getting AHP and Smart Macros to work, my lighting is pretty much under control.

Now, I would lilke to monitor temperatures outside, maybe air temp in the bar, water temp in the pool, etc.
I have not seen anything in X10.com to allow me to do this. 

Any ideas?

Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #1 on: November 11, 2006, 06:52:27 AM »

Smarthome made a module called a TempLinc. Basically it send an X10 powerline signal indicating the temperature by an X10 Address with a dim level. I don't know if anyone has gotten it to work with AHP as converting the address and dim level to a temp is not that easy to do. Also it uses one whole house code and the 16 unit codes for one complete set of temperatures.
Logged

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #2 on: November 11, 2006, 12:35:24 PM »

Smarthome made a module called a TempLinc. Basically it send an X10 powerline signal indicating the temperature by an X10 Address with a dim level. I don't know if anyone has gotten it to work with AHP as converting the address and dim level to a temp is not that easy to do. Also it uses one whole house code and the 16 unit codes for one complete set of temperatures.

Aside from the problem using it with AHP, the sensor for the TempLinc 1625  is only rated for indoor use - not even outdoor much less under water.  It's just a small bare circuit board within a plastic enclosure like an RJ11 telephone wall connection box.

My suggestion to Smarthome several years ago that their TempLinc needs an outdoor-rated sensor option has apparently gone unheeded.

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #3 on: November 11, 2006, 01:03:58 PM »

Good piont thet I did miss on the indoor thing.
Logged

vhoang

  • Sr. Member
  • ****
  • Helpful Post Rating: 7
  • Posts: 107
    • Automation Tips & Mini DLLs
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #4 on: November 11, 2006, 01:45:34 PM »

Other solutions:  will launch X10 PLC when certain temperature is reached.
http://www.toofishy.com/product.php?productid=80146
http://www.gunnsys.com/GSI-2/software/

Not perfect and kinda expensive, but just fyi's on how some people
approach the problem.
Logged

hocuspocus

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 18
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #5 on: November 13, 2006, 01:46:28 PM »

http://www.digikey.com

Search for "temperature cutouts"

They have normally open or closed and different temp ranges.  Radio Shack
may carry some also. May also be known as "Thermal Cutouts" or "Thermal
Swiches"

You could then use that with something like this: http://www.x10.com/security/pf284_s.html
Logged

medvampire

  • Full Member
  • ***
  • Helpful Post Rating: 4
  • Posts: 36
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #6 on: November 15, 2006, 10:59:04 PM »

I have been looking for about the same thing. I use solar heating for the pool and would like to have the pump turn on during the optimal hours for heating. I have come to the conclusion to use a sensor board and external program for measuring temps of the out side air, pool temp, and solar heater temp. I plan to use a XPR-W to control the pump called by command line from the AHP SDK.
Any more thoughts on the ideal?
Weeder Boards digital I/O http://www.weedtech.com/
Steve
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #7 on: November 11, 2007, 07:30:17 PM »

not to detract from AHP, but home domination supports multiple temperature sensors. I personally haven't made the leap yet, but have pondered it for exactly the same purpose.
Logged
Remote control is cool,

but automation rules!

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Is There Any Way to Display Swimming Pool Temp in AHP?
« Reply #8 on: November 12, 2007, 04:00:21 PM »

not to detract from AHP, but home domination supports multiple temperature sensors. I personally haven't made the leap yet, but have pondered it for exactly the same purpose.
Good point, but unfortunately it doesn't work for some users running the CM15A!
I've test run it and have yet to get HomeDomination to correctly connect to my CM15A in order to Send/Receive, others have no Problem!
Good thing there is a free trial! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.