Please login or register.

Login with username, password and session length

Author Topic: Brighten Commands with AHP  (Read 2459 times)

ignis

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Brighten Commands with AHP
« on: November 25, 2006, 02:15:04 PM »

I recently began using AHP and seeing some strang events.

I setup my outside house lights on address K15 and I've set them up to only come on at night. I'm seeing them turn on randomly throughout the day? The odd thing is that AHP tells me they're turning on at only %52

Coincidentally, I have my hallway lights set to K2 and they programmed to brighten by 50% when they see motion. But, when I test them, AHP tells me that the hallway lights were brightened to 52%.

So, my question is... Are my outside lights being turned on when I requesting my hallway lights to turn on? Also, why are they turning on at 52% instead of 50% light I programmed it?

Thoughts?
Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Brighten Commands with AHP
« Reply #1 on: November 25, 2006, 03:59:42 PM »

Could be AHP's ghost command bug. Try putting a second or 2 delay after all your dim commands that are not immediately followed by another dim command. There are several discussions of this problem on the forum.

Here's one link.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.