Please login or register.

Login with username, password and session length
Advanced search  

News:

The X10Hub (PiX10Hub) is here! Created by the Community, for the Community.:)% #:)

Author Topic: Vanguards won't work with remote connection  (Read 12342 times)

Dave Butler

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Vanguards won't work with remote connection
« on: March 12, 2007, 02:27:12 PM »

I have 2 ActiveHome Pro systems at 2 different locations, both with multiple standard (robotic) cameras and each with one Vanguard Camera as well.  Everything works fine on the installed (host) computer, but when connecting through the internet, via the myhouse ActiveHome remote program,the pushbutton menus for the presets won't work on the Vanguards.  Through a complicated macro, I can get the program to run the robotic mount program with the Vanguard connected, and I can use the 4 presets and other tilt and pan functions (not zoom, of course), but it's not a very friendly solution.  X10 support won't comment on the problems except to say that I should reinstall the software (which I have done to no avail).  Does anybody have a Vanguard camera (with or without other "standard" cameras that will perform all of the functions correctly with the remote connection?  I can get it to work through a program like gotomypc.com, but the graphics are very very slow.  I can be reached directly at my email, info@aviationseminars.com ... Thanks!
Logged

MichaelC

  • Hero Member
  • *****
  • Helpful Post Rating: 36
  • Posts: 151
Re: Vanguards won't work with remote connection
« Reply #1 on: March 14, 2007, 06:28:55 PM »

So the presets work for the regular pan/tilt bases, but not the Vanguard cameras? Do the names of the Vanguard presets come through if you change them on the host computer?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.