Please login or register.

Login with username, password and session length

Author Topic: X10 Slim Line Switcs  (Read 5117 times)

hbu

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
X10 Slim Line Switcs
« on: March 21, 2007, 10:51:58 PM »

How do I change the house code on the Slim Line Switch?
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: X10 Slim Line Switcs
« Reply #1 on: March 21, 2007, 11:31:42 PM »

The manual is available here: Stick-A-Switch™ (Model SS13A) Installation and operating instructions

Excerpt

To change the Housecode
• Press and hold the first (top) ON rocker key. The red LED blinks once. 3 seconds later, the LED
blinks the current setting: 1 blink for Housecode A, 2 blinks for B..... 16 blinks for P.
• Release the first (top) ON rocker key.
• Press and release the first (top) ON rocker key the appropriate number of times for the House
Code you want to set. Once for A, twice for B, etc. The LED blinks for each press.
IMPORTANT: Hold the button on your last press. 3 seconds later, the red LED blinks back the
new setting, e.g. 3 blinks for Housecode C. If you do not follow this programming sequence,
the LED will stay on for 1 second and your existing setting will not be changed.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.