Please login or register.

Login with username, password and session length

Author Topic: Re: Internet Plug-in: what do you want to see? [5 of 5]  (Read 6170 times)

keith

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: Internet Plug-in: what do you want to see? [5 of 5]
« on: May 11, 2005, 06:23:45 PM »

Not that I mean to stir the fire. <BR> <BR>No point kicking each others dog about an <BR>OS. Screw that. "Put 'em in the box boys" <BR> <BR>Spend $10 and some coding time and adapt a <BR>micro to: One side communicates with the AHP <BR>micro, the other side is a NAT enabled <BR>router with a firmware HTTPS interface. Plug <BR>in 128 bit encryption and you could run it <BR>from your Ice and Water dispenser on the <BR>fridge. <BR> <BR>It's not rocket science, seriously, take the <BR>weekend and hack up your 614 router and tell <BR>me it can't be done, securely, on the <BR>cheap...then forget about the OS war, it's a <BR>non-issue. <BR> <BR>It also means you can dump all the crap <BR>hanging from power strips and plugs in <BR>your "cockpit room", stick it in an <BR>enclosure in the garage with your 802 gear <BR>and forget the whole mess, just call up the <BR>webpage, authenticate and do your thing. <BR>

We're starting work on our next plug-in, <BR>which will put control of ActiveHome Pro <BR>(including cameras and video, if you have <BR>iWitness) on the Internet. We have a number <BR>of features in mind, but are looking for more <BR>ideas from our users. <BR> <BR>What kinds of features would you expect or <BR>like to see in an Internet plug-in for <BR>ActiveHome Pro?


Internet Plug-in: what do you want to see?

Re: Internet Plug-in: what do you want to see? [2 of 5]

Re: Internet Plug-in: what do you want to see? [3 of 5]

Re: Internet Plug-in: what do you want to see? [4 of 5]


[TTA Edit: Experiment to determine whether or not SPLITTING 'Highly-Viewed' / 'Highly-Replied' but currently INACTIVE threads from LONG, LONG AGO (I'm starting with ~2 years) into parts will allow current ACTIVE threads to appear in the Top 10 Topics (by Replies) section of the Statistics Center (aka More Stats) Page.

NOTE: I *WILL* address the <BR> problem...]
« Last Edit: April 19, 2007, 05:03:23 PM by TakeTheActive »
Logged

david k

  • Sr. Member
  • ****
  • Helpful Post Rating: 0
  • Posts: 126
Re: Internet Plug-in: what do you want to see?
« Reply #1 on: May 11, 2005, 08:00:34 PM »

I want it to work out of the box (or
download).  No bugs.  I want it for little
to nothing out of my pocket.
I want, good.
Logged

X10 Dreams

  • Guest
Re: Internet Plug-in: what do you want to see?
« Reply #2 on: May 11, 2005, 09:52:56 PM »

"David K  5/11/2005 05:00 PM
I want it to work out of the box (or
download).  No bugs.  I want it for little
to nothing out of my pocket.  I want, good."

Now that is funny, my friend.  Hey X10, did
you hear?  We want it good, and without
bugs :)  I also want to lose fifty pounds
and grow six inches taller.

Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Internet Plug-in: what do you want to see?
« Reply #3 on: May 12, 2005, 09:53:17 AM »

Wow! It took awhile to get through all
those posts!

For me the most useful feature would be the
ability to plug it into an ethernet port
directly skipping the need and dependence
on having a computer on 24/7.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

aaron

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: Internet Plug-in: what do you want to see?
« Reply #4 on: May 12, 2005, 04:11:13 PM »

I would still like to see a macro that would
run when DS7000 went into alarm.
Logged

aaron

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: Internet Plug-in: what do you want to see?
« Reply #5 on: May 12, 2005, 04:11:31 PM »

I would still like to see a macro that would
run when DS7000 went into alarm.
Logged

Mike C

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 35
Re: Internet Plug-in: what do you want to see?
« Reply #6 on: May 12, 2005, 11:29:53 PM »

Make sure that you include web enabled cell
phones when thinking about remote control,
status and camera viewing.  They have small
screens and limited keys.
Logged

Mike C

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 35
Re: Internet Plug-in: what do you want to see?
« Reply #7 on: May 12, 2005, 11:30:43 PM »

Make sure that you include web enabled cell
phones when thinking about remote control,
status and camera viewing.  They have small
screens and limited keys.
Logged

keith

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: Internet Plug-in: what do you want to see?
« Reply #8 on: May 13, 2005, 12:25:15 AM »

Hey Aaron, I threw together a little circuit
that I'm testing. It's just a comparator
with an RC front end that charges
incrementally based on being triggered by
multiple alarm triggers. if the 7000 fires
off, it takes "X" number of triggers over a
period of time to charge up the input and
trip the comparator. With a feedback loop
you can latch it and AHP can read the
condition (Mine is through a universal
interface) then do its thing. It's just a
cheap and dirty hack to see if it's stable
and reliable. When I get it tweaked I'll
stick it on a website.
Logged

james

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 34
Re: Internet Plug-in: what do you want to see?
« Reply #9 on: May 13, 2005, 09:39:54 PM »

Keith: I would also like to know your
results on the DS7000 modification. I got
tired of waiting for a smoke detector from
X10, so I built my own for about $30.00 that
would trigger the DS7000. I bought a second
DS7000 and use it only for fire alarm. I
have it on a seperate house code and a
recording that calls my cell phone when
smoke detected.
Logged

paul mayfield

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 23
Re: Internet Plug-in: what do you want to see?
« Reply #10 on: May 15, 2005, 09:32:53 AM »

I would like to be able to log in as an
administator and have full control of AHP. I
would be able to clear memmory and reload
remotely (this would be a big plus as I have
to do this once a week for reliability
reasons, if I don't do this weekly my macros
and timers quit, activity log shows them
working but they quit functioning WISH THIS
COULD BE FIXED and hope an updated CM15A is
released!) I also have problems with RF
commands that occur to quickly ie 2 motion
sensors at the same time, I have had to
write redundant macros to make sure lights
go out via timers rather than the off
command from the motion sensors. I was late
for work one day as the timers had quit, now
that I reload weekly it is not an issue,
just wish that the system was stable enough
that I didn't have to do that. I have been
using this system way back to cp290 and the
CM11A never failed me - I got into the new
unit because of the communication issue
under XP!!
Logged

harry

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: Internet Plug-in: what do you want to see?
« Reply #11 on: May 17, 2005, 11:37:18 PM »

Would you list the X10 Pro wall switch
XPDI3 in the Pro Module section and
correctly list the DS7000. The DS7000 is
now listed as DX7000.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.